Fronius AccuPocket 150/400 TIG - Control Elements and Connections; Safety; Connections and Components; Control Panel

71
EN
Control elements and connections
Safety
Connections and
components
(1) Mains cable
for connection to the mains
(2) Connection P1 - charging lead
socket
to plug in the charging cable for
connection to the power source
(3) Control panel
Control panel
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
NOTE! Due to software updates, you may find that your device has certain func-
tions that are not described in these operating instructions or vice versa. Individ-
ual illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.
(1) (2) (3)
(1) CHARGING indicator (green)
Charging in progress
(2) QUICK CHARGING indicator
(green)
Quick charging in progress
(3) COMPLETED indicator (green)
Power source fully charged
(4) Error indicator (red)
See the Troubleshooting section
on page 75
(5) Mains indicator (green)
Mains supply voltage available
(6) QUICK CHARGE button
Starts and stops quick charging
CHARGING
ActiveCharger 1000
QUICK CHARGING
QUICK
CHARGE
QUICK
CHARGE
COMPLETED
(5)(4)
(1)
(2)
(3)
(6)