47
EN
Software version
The full version number of the currently installed
software is spread across a number of displays
and can be retrieved by turning the adjusting dial.
Automatic switch-off (time Shut down)
If the power source is not operated for the speci-
fied length of time, it switches off automatically.
Factory setting: 900 seconds
300 - 900
OFF
Seconds
Factory setting (FACtory)
The power source can be reset to its factory set-
tings here.
- Cancel reset no
- Reset the parameters for the selected weld-
ing process to their factory settings
YES
- Reset the parameters for all welding process-
es to their factory settings
ALL
Resetting of the selected value to its factory set-
ting must be confirmed by pressing the adjusting
dial.
Parameter Description Range Unit
To Next Page
Loading...
