67
EN
Operating modes
Operating mode Activation/deactivation Features
Charging Starts automatically when
the charger is connected to
the power source and the
mains
- The CHARGING indi-
cator is lit
- Mains indicator lit
- The power source is charged at
optimum charging power
- The charging characteristic of
this mode maximises the ser-
vice life of the power source
- When the COMPLET-
ED indicator lights up, the pow-
er source is fully charged and
the charger switches to conser-
vation charging mode
Quick charging Activation:
Press the QUICK
CHARGING button
Deactivation:
Press the QUICK
CHARGING erneut
drücken button again
- Charging mode
resumes
- The QUICK CHARG-
ING indicator is lit
- Mains indicator lit
- The power source is charged at
the maximum possible charging
power
- When the COMPLET-
ED indicator lights up, the pow-
er source is fully charged and
the charger switches to conser-
vation charging mode
Conservation
charging
Starts automatically once
the charger has fully
charged the power source
- Mains indicator lit
- The COMPLETED indi-
cator is lit
- The power source is charged at
conservation charging power
- In this mode, the power source
can remain connected to the
charger without being damaged
Hybrid mode
= the charger is
charging the pow-
er source while
the power source
is in operation
Activation:
Start welding during
charging
or connect the power
source to the charger
while it is in operation
- The QUICK CHARG-
ING indicator is lit (charging at
the maximum possible charging
power in hybrid mode)
- Mains indicator lit
- The power source is dis-
charged according to its operat-
ing load and simultaneously re-
charged by the charger
1
1
1
1
To Next Page
Loading...
