66
Start-up
Safety
Commissioning
WARNING! Incorrect operation or shoddy workmanship can cause serious injury
or damage. All activities described in these operating instructions may only be
carried out by trained and qualified personnel. All functions described in these op-
erating instructions may only be used by trained and qualified personnel. Do not
carry out any of the work or use any of the functions described until you have fully
read and understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
1
- Once connected, the battery capacity indicator on the power source flashes to
indicate the current state of charge; the battery is being charged
Select Quick Charge mode if required - details on the available operating modes can
be found in the following section
If the battery is fully charged:
- The COMPLETED indicator lights up on the charger
- On the power source, all segments of the battery capacity indicator are lit
NOTE! The system includes the following features for maximum user-friendli-
ness:
- It does not matter in what order the devices are connected to the mains
- The power source can even be connected to the charger while it is in use
1
2
To Next Page
Loading...
