Fronius IG-TL 3.6 - Fronius IG TL 3.6

126
Fronius IG TL 3.6 Input data
Output data
General data
Maximum DC power 3850 W
MPP voltage range 350 - 700 V DC
Max. input voltage
(at 1000 W/m² / -10 °C in an open circuit)
850 V DC
Max. input current 10.8 A DC
Max. array short circuit current 16.2 A
Nominal output power (P
nom
)3.68 kW
Max. output power
1)
3.68 kW
Nominal AC output voltage
2)
1 ~ NPE 230 V
Grid voltage range
2)
180 - 270 V
Maximum output current (single phase) 16 A AC
Nominal frequency
2)
50 - 60 Hz
1)
Harmonic distortion < 3 %
Power factor (cos phi) 1
Max. permitted grid impedance Zmax at PCC
3)
None
Max. recovery current
4)
0 A
5)
Switch-on current pulses
6
)0 A
5)
Maximum output fault current / duration 113 A / 89.5 µs
MPP adjustment efficiency 99,9 %
Maximum efficiency 97,7 %
Euro. efficiency 97,2 %
Night consumption 0.2 W
Cooling Controlled forced-air ventila-
tion
Degree of protection IP 55
in Australia, IP 45
Dimensions l x w x h 195 x 413 x 597 mm
Weight 19.1 kg
Permissible ambient temperature
(with 95% rel. humidity)
- 20 °C - +55 ?
EMC emissions class B
Inverter concept Transformerless
Degree of pollution 3
Over-voltage category (OVC) AC 3 / DC 2
Protection class as per IEC 62103 1