Fronius IG-TL 3.6 - Switching Key Lock On;Off

91
Setting the time
and date
Select the ‘Clock’ menu item.
Press the ‘Enter’ key.
The time is shown
(HH:MM:SS, 24 h display),
the digits for the hour flash.
Use the ‘Up’ and ‘Down’ keys to se-
lect a value for the hour.
Press the ‘Enter’ key.
The digits for the minutes flash.
Repeat steps 3 and 4 for the minutes
and seconds until...
the set time flashes.
Press the ‘Enter’ key.
The time is applied, the date is shown
(DD.MM.YYYY), the digits for the day
flash.
Use the ‘Up’ and ‘Down’ keys to se-
lect a value for the day.
Press the ‘Enter’ key.
1
2
3
4
5
6
7
8