To Next PageTo Next PageWhat to do if Fronius Welding System tS3 error occurs?
If the Fronius Welding System displays a tS3 error, it indicates overtemperature in the power source's secondary circuit. Allow the power source to cool down.
What to do if Fronius Welding System tSt error occurs?
If the Fronius Welding System displays a tSt error, it indicates overtemperature in the power source control circuit. Allow the power source to cool down.
General| Output Power | 3000 W |
|---|---|
| Input Voltage | 230 V |
| Frequency | 50/60 Hz |
| Protection Class | IP23 |
| Phase | Single-phase |
Covers operator responsibilities, proper use, environmental conditions, and general safety rules for safe operation.
Details risks from toxic gases, vapours, flying sparks, and noise pollution during welding operations.
Explains risks associated with mains current and welding current, including electric shock and proper grounding.
Covers dangers related to shielding gas cylinders, including pressure, explosion risks, and safe handling practices.
Provides a step-by-step guide for safely powering on and connecting the device for the first time.
Explains TIG welding modes like 2-step, 4-step, spot welding, and their associated parameters.
Details TIG welding safety, parameter display, navigation, preparation, and arc ignition methods.
Covers MMA welding safety, parameter display, navigation, and general MMA process overview.
Provides a comprehensive list of error codes, their causes, and recommended remedies.
