23
EN
General
Device concept
TransTig 2200 Job, MagicWave 1700 Job and
MagicWave 2200 Job with cooling unit
The MagicWave (MW) 1700 / 2200 / 2500 /
3000 / 4000 / 5000 and TransTig (TT) 800 /
2200 / 2500 / 3000 / 4000 / 5000 TIG power
sources are completely digitised, micropro-
cessor controlled inverter power sources.
The modular design and potential for sys-
tem add-ons ensure a high degree of flexi-
bility. The devices can be adapted to any
situation.
The straightforward operating concept
means that essential functions can be seen
at a glance and adjusted as required.
A standardised LocalNet interface makes it
easy to connect digital system add-ons (e.g.
JobMaster TIG welding torches, robot weld-
ing torches, remote control units, etc.).
Automatic cap shaping for AC welding with
MagicWave power sources takes the diam-
eter of the tungsten electrode into account
to help produce optimum results.
The power sources are generator-compati-
ble. They are exceptionally sturdy in day-to-
day operation thanks to the protected con-
trol elements and their powder-coated
housings.
To optimise the ignition sequence in TIG AC
welding, the MagicWave takes account not
only of the diameter of the electrode, but
also of its temperature, calculated with ref-
erence to the preceding welding and weld-
ing off-times.
MagicWave 3000 Job with cooling unit and
MagicWave 2500 Job
TransTig 5000 Job and MagicWave 5000 Job,
both with cooling unit and trolley
To Next Page
Loading...
