30
Display Settings
Set time
Setting the time (hh:mm:ss or hh:mm am/pm, depending on the setting under Time dis-
play format)
Set date
Setting the date (dd.mm.yyyy or mm/dd/yyyy, depending on the setting under Date dis-
play format)
Time display format
For specifying the format in which the time is displayed
Setting range 12 hrs / 24 hrs
Factory setting depends on the country setup
Date display format
For specifying the format in which the date is displayed
Setting range mm/dd/yyyy / dd.mm.yy
Factory setting depends on the country setup
Daylight saving time
Activating/deactivating the automatic adjustment for daylight saving time
IMPORTANT! Only use the function for automatic daylight savings adjustment when
there are no LAN or WLAN-compatible system components in a Fronius Solar Net Ring
(e.g., Fronius Datalogger Web, Fronius Datamanager or Fronius Hybridmanager).
Setting range on/off
Factory setting on
IMPORTANT! The time and date must be set correctly for day and year values to be dis-
played properly.
Setting range Language / Night mode / Contrast / Illumination
Language
Setting the display language
Setting range German, English, French, Dutch, Italian, Spanish, Czech, Slo-
vak, etc.
Night Mode
DATCOM night mode; controls DATCOM and display operation at night or when there is
insufficient DC voltage available
Setting range AUTO / ON / OFF
Factory setting OFF
To Next Page
Loading...
