Need help?Do you have a question about the Fronius Primo 10.0-1 and is the answer not in the manual?
General| Maximum Input Voltage | 1000 V |
|---|---|
| Max. output current | 43.5 A |
| AC Output Frequency | 50 / 60 Hz |
| THD | < 3 % |
| Maximum Efficiency | 98.1% |
| Protection Rating | IP 65 |
| Rated Output Power | 10000 W |
| Max. apparent AC power | 10000 VA |
| Maximum DC Power | 13000 W |
| Operating Temperature Range | -25°C to +60°C |
General instructions for inverter installation and maintenance, emphasizing reading safety procedures.
Details warnings for hazards to equipment or personnel and potential damage.
Covers compliance with National Electrical Code, ANSI/NFPA 70, and Canadian standards.
Ensures proper grounding, cable tightening, and checks for damage during installation.
Details securing the inverter to the wall bracket using fastening screws to specified torque.
Warning to remove fallen parts from the connection area before hanging the inverter.
Lists available conduit sizes for DATCOM, AC, and DC connections.
Diagrams and setup details for various Delta grid configurations.
Diagrams and setup details for WYE and Stinger grid configurations.
Diagram and setup for split phase grid configurations.
Illustrates the connection of solar modules, inverter, and grid components.
Details the layout and torque specifications for AC and DC terminal connections.
Details wire gauge and type compatibility for AC connections.
Instructions for connecting AC wires to the terminal block, including torque and spacing.
Details on RCD type and compliance with national standards for AC circuits.
Illustrates correct and incorrect methods for DC cable connections.
Shows how to strip and prepare DC cables for connection.
Details connecting DC cables from solar modules to the inverter's DC inputs.
Provides specifications for stripping DC cable insulation length.
Details wiring and torque specifications for connecting option modules.
Instructions for installing the DATCOM communication module.
Shows PV array configurations and voltage testing procedures.
Identifies fuse locations and the maximum current rating for each terminal.
Provides instructions on how to safely replace faulty fuses with new ones of the same rating.
Explains Fronius Solar Net as a data network for connecting multiple inverters.
Details the ports and interfaces in the data communication area.
Describes module connections, indicators, and USB socket functionality.
Illustrates data logging setup and system examples with Fronius components.
Procedure for opening the DATCOM module compartment.
Steps for installing the DATCOM module into the inverter.
Details on securing the DATCOM module with screws.
Instructions for re-attaching the cover after DATCOM module installation.
Shows preparation steps for connecting DATCOM cables.
Illustrates the process of connecting DATCOM cables to the module.
Shows how to mount the inverter after DATCOM connection.
Final checks and connections for the DATCOM module.
Explains how condensation can damage components and the need for sealing.
Demonstrates the procedure for sealing conduits with elastic sealant.
Details inverter power controls, locking mechanism, and engagement procedures.
Covers language, country, date, and time setup for the inverter.
Instructions for AC connection, daylight saving, MPP tracking, and grid tests.
Instructions and notes on using a padlock for securing the inverter.
Procedure for updating inverter firmware using a USB device.
Shows the display for AC output power.
Procedure for entering access codes.
Lists available options within the BASIC menu.
Details adjustable trip points for 208V, 220V, 240V, and 50Hz grid voltage setups.
Specifies trip limits for frequency and NLMON settings.
Provides reconnection parameters, accuracy specifications, and default settings.
Illustrates how to apply serial number stickers for customer use.
Contact details and website for Fronius USA technical support.
Contact details and website for Fronius Canada technical support.
Contact details and website for Fronius Mexico technical support.
Contact details and website for Fronius International technical support.
To Next Page