Fronius Primo 5.0-1 - Tools and Measurement Devices; General; Required Tools; Measuring and Inspection Equipment

87
EN-US
Tools and measurement devices
General The "Tools and measurement devices" chapter contains an overview and a description of
all the tools needed to properly service the device. This includes the following tools:
- Required tools
- Measuring and inspection equipment
- Auxiliary materials
Required Tools - TX 20 Torx screwdriver
- TX 25 Torx screwdriver
- 3 mm slotted screwdriver
- Socket wrench
- Wrench socket size 7 mm
- Wrench socket size 36 mm
- Wrench socket size 41 mm
- Flat spanner size 7 mm
- Flat spanner size 36 mm
- Flat spanner size 41 mm
- Diagonal cutting pliers
- Needle-nose pliers
- Torque wrench with bit set 1–6 Nm
- Torque ratchet 1–10 Nm
Measuring and In-
spection Equip-
ment
- Digital multimeter
- Equipment for safety inspection
Auxiliary materi-
als
- Cleaning material (spray, paper)
- Cable ties 102 (42,0407,0099)
- Heat conducting film TPC (42,0300,3054)
- Screw with gasket PT 5x25 (42,0401,4231)
- Thermal pad (42,0300,3138)