Fronius Robacta PTW 3500 - Applications; Scope of Supply

3
EN
Scope of supply
The water-cooled plasma robot welding torch is designed for plasma welding and plas-
ma brazing of materials up to a thickness of 1.5 mm (PTW 500), 3 mm (PTW 1500) and
8 mm (PTW 3500).
The welding torches have a Fronius F++ connection as standard. Various adapters are
available to enable the torches to be operated with any standard plasma device. Each
torch can be equipped with KD Drive, a pushed wire-feed unit or a drag gas nozzle.
Machine concept
(continued)
Applications The plasma robot welding torch is used in automated applications, e.g.:
- Pipeline and equipment construction
- Container construction
- Applications requiring the highest quality standards
- Applications using special materials (e.g. titanium, nickel-based alloys)
Robacta PTW 500 scope of supply
Plasma nozzle ∅ 1.2 mm
Shielding gas nozzle
Torch body with stop ring
Adjusting
gauge
Holder
Tungsten electrode ∅ 1.0 mm
Hosepack 4 m,
Fronius F++ / FG connection
Torch cap
Clamping sleeve
∅ 1.0 mm
Holder
Ceramic
gas nozzle
Connection for
cut-out box