Fronius Robacta PTW 3500 - Adjusting the PTW 1500 Tungsten Electrode (continued); Adjusting the PTW 3500 Tungsten Electrode

11
EN
Adjusting the
PTW 3500 tungs-
ten electrode
Loosen the torch cap - caution, the tungsten
electrode may fall out of the plasma torch if the
torch is in a particular position.
Place adjusting gauge onto plasma nozzle ...
1
2
2
2
3
4
1
Fix the tungsten electrode in place using the torch
cap
... and adjust tungsten electrode
Fix the tungsten electrode in place using the torch
cap
... and adjust tungsten electrode
Adjusting the
PTW 1500 tungs-
ten electrode
(continued)
max. 3 Nm