Fronius Robacta PTW 3500 - PTW 500 Options; PTW 1500 Options; PTW 3500 Options

5
EN
PTW 500 options - Hot wire option
- Plasma nozzle 0.6 / 0.8 / 1.0 / 1.4 / 1.6 mm
- Adapter for the non-digital PlasmaModul
- Cold wire feeder with drive (push-pull system): Robacta Plasma KD Drive
- Cold wire feeder (push system): Robacta Plasma KD
- Drag gas nozzle 50 / 100 mm
PTW 1500 opti-
ons
- Adjusting gauge ∅ 1.5 - 2 mm
- Cold wire feeder with drive (push-pull system): Robacta Plasma KD Drive
- Cold wire feeder (push system): Robacta Plasma KD
- Hot wire option
- Plasma nozzle 1.0 / 1.5 / 2 / 3 mm; 2.0 x 29 mm long
- Ceramic centring tube 1.6 / 3.2 mm
- Clamping sleeve 1.6 / 3.2 mm
- Adapter for the non-digital PlasmaModul
- Drag gas nozzle 50 / 100 mm
PTW 3500 opti-
ons
- Cold wire feeder with drive (push-pull system): Robacta Plasma KD Drive
- Cold wire feeder (push system): Robacta Plasma KD
- Hot wire option
- Plasma nozzle 2.0 / 2.5 / 3.5 / 4.0 mm
- Plasma nozzle 2.0 / 2.5 / 3.2 / 3.5 / 4.0 mm with 4 x 1 mm balance holes
- Conical plasma nozzle
- Ceramic centring tube 6.4 mm
- Clamping sleeve 6.4 mm
- Adapter for the non-digital PlasmaModul
- Drag gas nozzle 50 / 100 mm
- Ceramic gas nozzle + appropriate stop ring