EasyManua.ls Logo

Fronius Selectiva 2040 2kW - Stopping Charging

Fronius Selectiva 2040 2kW
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
EN
Stopping charg-
ing
WARNING!
Danger due to ignition of oxyhydrogen caused by sparks generated when the charg-
ing leads are disconnected.
This may result in serious injury and damage to property.
Before disconnecting or unplugging the charging plug, first stop the charging process
by pressing the "Stop/Start" key
NOTE!
Risk of damage to the battery if it is disconnected from the charger before the charg-
ing process is complete.
This may result in damage to the battery.
Only disconnect the battery from the charger when it is fully charged (green "Battery
charged" indicator lights up)
Unplug the charging plug
or disconnect the
(-) charging lead from the negative pole of the battery and the
(+) charging lead from the positive pole of the battery
As soon as the battery is fully charged and has cooled down, the following indicators light
up:
- "Battery charged" indicator (green)
- "Battery cooled down" indicator (blue)
For an optimal battery life, only disconnect
the battery from the battery charging sys-
tem when the blue "Battery cooled" indica-
tor is showing in addition to the green
indicator, in accordance with the explana-
tion below. If several battery charging sys-
tems are in use, first disconnect the
battery which has been fully charged for
the longest (the coolest).
To stop the charging process:
Press the "Stop/Start" key
1
2

Related product manuals