56
Selectiva 3 kW
Mains voltage
1)
~ 230 V, ±15%
Grid frequency 50/60 Hz
Mains fuse protection
2)
max. 16 A
Minimum mains lead cross section 1.5 mm² (0.002325 in²)
Protection class I (with ground conductor)
Max. permitted mains impedance Z
max
on PCC
3)
None
Standby usage 5 W
EMC device class A
Dimensions l x w x h 417 x 110 x 198 mm
(16.42 x 4.33 x 7.8 in.)
Pollution level 3
Degree of protection
4)
IP21
Overvoltage category III
Operating temperature
5)
-20 °C to +40 °C
(-4 °F to 104 °F)
Storage temperature -25 °C to +80 °C
(-13 °F to 176 °F)
Relative humidity maximum 85%
Maximum altitude above sea level 2000 m (6561 ft.)
Marks of conformity according to rating plate
Product standard EN62477-1
1)
The device is approved for operation on neutral-earthed networks.
2)
The heat value of the circuit breaker must not exceed 30,000 A
2
.
3)
Interface to a 230/400 V, 50 Hz public grid
4)
Only to be used in rooms, must not be exposed to rain or snow
5)
A reduction in power may occur at a high ambient temperature (derating)
Device-specific
data
Max. AC
current
Max. AC
power
Nominal
voltage
Max.
charging
current
Weight
5)
Selectiva 2080 3kW 15.2 A 3020 W 24 V 80 A 8.2 kg
(18.08 lb)
Selectiva 2100 3kW 15.3 A 3290 W 24 V 100 A 8.2 kg
(18.08 lb)
Selectiva 2120 3kW 15.6 A 3320 W 24 V 120 A 8.7 kg
(19.18 lb)
Selectiva 4045 3kW 15.1 A 3240 W 48 V 45 A 7.4 kg
(16.31 lb)
Selectiva 4060 3kW 15.3 A 3270 W 48 V 60 A 7.4 kg
(16.31 lb)
5)
With standard mains and charging leads
To Next Page
Loading...
