Fronius Selectiva 2100 - Tools and Measuring Devices; General; Tools Required; Measuring and Testing Equipment

89
EN
Tools and measuring devices
General "Tools and measuring devices" offers an overview and description of all equipment needed
to service the device professionally. This equipment includes:
- Tools required
- Measuring and testing equipment
- Ancillary materials
Tools required - Torx screwdriver, TX 20
- Torx screwdriver, TX 25
- Slotted screwdriver, 3 mm
- Slotted screwdriver, 6.5 mm
- Socket wrench
- Socket wrench insert, 5.5 mm
- Socket wrench insert, 8 mm
- Socket wrench insert, 10 mm
- Socket wrench insert, 13 mm
- Socket wrench insert, 40 mm
- Flat spanner, 5.5 mm
- Flat spanner, 8 mm
- Flat spanner, 10 mm
- Flat spanner, 13 mm
- Flat spanner, 40 mm
- Diagonal cutting pliers
- Needle-nosed pliers
- Gas pliers
- Torque screwdriver with bit insert, 1 - 6 Nm
- Torque ratchet, 1 - 20 Nm
Measuring and
testing equip-
ment
- Digital multimeter
- Safety inspection equipment
Ancillary materi-
als
- Assembling aid - power modul (42,0201,4317)
- Cleaning materials (spray, paper)
- Cable tie types 102 and 200