The country setup can only be set when starting the inverter for the first time. If
the country setup needs to be changed at a later date, please contact your in-
staller / Technical Support team.
Installation with
the app
The "Fronius Solar.start" app is required for this installation method. Depending
on the end device with which the installation will be carried out, download the
app for the respective platform.
1 2
open access point
Fronius Solar.start
1
Download and install the Fronius Solar.start app.
2
Open the access point by touching the sensor
ü
Communication LED flashes blue.
3
Open the Solar.start app and follow the installation wizard. Scan the QR code
on the rating plate with a smartphone or tablet to connect to the inverter.
4
Add system components in Solar.web and start up the PV system.
The network wizard and the product setup can be carried out independently of
each other. A network connection is required for the Solar.web installation wiz-
ard.
Installation us-
ing the web
browser
WLAN:
open access point
192.168.250.181
2
1
Secured
Password:
FRONIUS_Serialnumber
XXXXXXXX
Rating plate
Access point
password:
XXXXXXXX
1
Open the access point by touching the sensor
ü
Communication LED flashes blue.
2
Establish the connection to the inverter in the network settings (the inverter
is displayed with the name "FRONIUS_" and the serial number of the device).
3
Enter the password from the rating plate and confirm.
IMPORTANT!
To enter the password on a Windows 10 operating system, the link "Connect
using a security key instead" must first be activated to establish a connec-
tion with the password.
100
To Next Page
Loading...
