EasyManua.ls Logo

Fronius Symo Hybrid 5.0-3-S - Proper Use; Warning Notices on the Device

Fronius Symo Hybrid 5.0-3-S
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Proper use The solar inverter is exclusively intended for charging a battery with direct current from
solar modules, or for converting this direct current into alternating current and feeding it
into the public grid or the household network in emergency power mode.
The following actions constitute improper use:
- Any use above and beyond this purpose
- Making any modifications to the inverter that have not been expressly approved by
Fronius
- Installing components that are not distributed or expressly approved by Fronius
- Operating the device with a battery that has not been approved by Fronius
- Operating the equipment with an energy meter that has not been approved by
Fronius
Fronius shall not be liable for any damage resulting from such action.
No warranty claims will be entertained.
Proper use also includes:
- Carefully studying and obeying the Installation and Operating Instructions
- Performing all stipulated inspection and maintenance work
When designing the photovoltaic system, ensure that all of its components are operated
within their permitted operating ranges at all times.
Observe all the measures recommended by the solar module manufacturer to ensure
that the solar module retains its properties in the long term.
Observe the stipulations of the power supply company concerning energy fed into the
grid, emergency power mode and the operation of storage systems.
The Fronius Symo Hybrid is a grid-connected inverter with an emergency power function
– it is not a stand-alone inverter. The following restrictions must therefore be observed in
emergency power mode:
- Emergency power mode may be in operation for at least 1500 hours
- Emergency power mode may be in operation for more than 1500 operating hours if
15% of the duration of the inverter's grid power feed operation is not exceeded at
the relevant time
Warning notices
on the device
There are warning notices and safety symbols on and in the inverter. These warning
notices and safety symbols must not be removed or painted over. They warn against
incorrect operation, as this may result in serious injury and damage.
14

Table of Contents

Related product manuals