Settings – Passwords
General remarks Access to Fronius system monitoring is controlled by assigning passwords.
There are 3 different types of password available for this purpose:
- The administrator password
- The service password
- The user password
Passwords Administrator password
User name = admin
The administrator password is set during the commissioning process and grants the user
read access and the right to change settings. The user can open the Settings menu and
enter all settings apart from those for “DNO Editor” and "Meter".
If an administrator password has been set, the user must enter the user name and pass-
word in order to open the Settings menu.
Service password
User name = service
The service password is usually assigned by the service technician or system installer
when running the Setup wizard and it provides access to system-specific parameters.
The service password is required to modify meter and DNO Editor settings. The "Meter"
and "DNO Editor" menu items cannot be accessed unless a service password has been
assigned.
User password
When the 'Protect your system monitoring from unauthorized read access' selection
box is checked, the user password is displayed, user name = user.
If a user password has been assigned, the user only has read permissions. The user is
not able to open the “Settings” menu.
If a user password is assigned, the user is required to enter the user name and pass-
word whenever they want to establish a connection.
91
EN
To Next Page
Loading...
