Services – System information
System informa-
tion
The system information page contains various information about the system.
Additionally, there are the following buttons:
- "Datalogger restart"
For restarting the Datamanager / system monitoring
- "Reset to factory settings" button with the selection options:
• "All settings except for the network"
For resetting the Datamanager (system monitoring) to the factory settings.
The network settings and all the items protected by the service user (DNO
Editor, meter settings and the service password) are retained
• "All settings"
For resetting the Datamanager (system monitoring) and the network settings to
the factory settings.
All the items protected by the service user (DNO Editor, meter settings and the
service password) are retained
IMPORTANT! If the Datamanager (system monitoring) is reset to the factory settings, it
is essential to check the time and date settings.
85
EN
To Next Page
Loading...
