Fronius Symo Hybrid 5.0-3-S - Fronius System Monitoring Setup

The Fronius system monitoring web page
Fronius system
monitoring web
page – Overview
The Fronius system monitoring web page shows the following data:
(1) Additional settings
(2) System overview: displays the current power flow on the hybrid system
(3) System yield overview
(4) Overview of recent status codes
(5) System information, network diagnostics, firmware update
(6) The Settings menu
(1)
(5)
(3)
(6)
(2)
(4)
The Settings
menu
When you click "Settings", the Settings menu appears on the Fronius system monitor-
ing web page.
The "Settings" menu is where you configure Fronius system monitoring.
Setting and viewing "General" menu items
1
Establish a connection to Fronius system monitoring.
2
Click "Settings".
3
Click the required menu item.
The relevant menu item opens.
4
View the menu item or edit it as required.
5
If applicable, click the button for implementing the setting (e.g. Save, Synchronise,
etc.)
The edited data is applied.
83
EN