9
EN
„Tools and measuring instruments“ offers an overview and description of all equipment
needed to service the machine professionally. This equipment includes:
- Tools required
- Measuring and inspection equipment
- Ancillary materials
- Box spanner (8 mm)
- Large needle nosed pliers (approx. 160 mm)
- Small wire cutting pliers
- Manual torque wrench (1-6 Nm, 42,0411,0013)
- Slotted screwdriver (small)
- Slotted screwdriver (medium)
- Phillips screwdriver (PH1)
- Phillips screwdriver (PH2)
- Torx screwdriver (TX 20) or insert bit for manual torque wrench
- Torx screwdriver (TX 25) or insert bit for manual torque wrench
- Allen key (3 mm)
- Allen key (4 mm)
- Allen key (5 mm)
- Flat spanner (13 mm)
- Flat spanner (17 mm)
- Flat spanner (19 mm)
- Oeteker pliers
- Molex extractor tool (42,0410,0290)
- Digital multimeter
- PC with MS Windows operating system
(System requirements can be found in the operating instructions for the BSL tool)
- „BSL tool“ (4,050,082)
- „LocalNet RS 232 Converter“ (4,100,262)
- CD ROM TechGuide (40,0006,2365)
- Contact spray (40,0009,0014) or alcoholic solvent
- Heat-conductive paste (40,0009,0043)
- Application instrument for heat-conductive paste (42,0435,0020)
- Sandpaper (42,0410,0436), grit size 500 or finer
Tools and measuring instruments
General remarks
Tools required
Measuring and
inspection equip-
ment
Ancillary materi-
als
To Next Page
Loading...
