Fronius TransTig 1600 - Technical Data; TransTig 1600; 1700 Specifications

34
TransTig 1600 /
TransTig 1700
TransTig 1600 TransTig 1700
Mains voltage 1 x 230 V 1 x 230 V
Mains voltage tolerance +/- 15 % +/- 15 %
Power frequency 50 / 60 Hz 50 / 60 Hz
Mains fusing protection 16 A slow blow 16 A slow blow
Apparent power at 50% ED* 7,0 kVA 6,2 kVA
100% ED* 3,7 kVA 5,0 kVA
Cos phi 100 A 0,99 -
120 A - 0,99
Efficiency 50 A 90 % -
80 A - 89 %
Welding current range TIG 2 - 160 A 2 - 170 A
EL 2 - 140 A 2 - 140 A
Welding current TIG
10 min/40°C (104°F) 35% ED* 160 A 170 A
10 min/40°C (104°F) 60% ED* - 135 A
10 min/40°C (104°F) 100% ED* 110 A 120 A
Welding current EL
10 min/40°C (104°F) 50% ED* 140 A 140 A
10 min/40°C (104°F) 100% ED* 100 A 115 A
Welding voltage range according to standard characteristic
TIG 10,1 - 16,4 V 10,1 - 16,8 V
Electrode 20,1 - 25,6 V 20,1 - 25,6 V
Open circuit voltage 230 V 45 V DC 92 V DC
Insulation category B B
Protection class IP 23 IP 23
Type of cooling AF AF
Marks of conformity S, CE S, CE
*duty cycle
Technical data