Need help?Do you have a question about the Fronius TransTig 170 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Welding Current Range | 10 - 170 A |
| Rated Welding Current | 170 A |
| Welding Process | TIG, MMA |
| Input Current | 16 A |
| Protection Class | IP23 |
| Power Supply | Single-phase |
| Welding Processes | TIG, MMA |
Explains danger levels (DANGER, WARNING, CAUTION, NOTE) and general safety rules.
Covers grid connection, personal protection, noise, gas hazards, sparks, EMC, EMF, and setup safety.
Details safety measures in normal operation, maintenance, inspection, and disposal.
Describes the microprocessor-controlled design, modularity, and core operational advantages.
Lists typical uses and compatible remote controls for the power source.
Explains the safety labels and symbols found on the device for user awareness.
Details the control panel layout, indicators, displays, and the welding parameter overview.
Identifies and describes the various sockets, switches, and filters on the device.
Guides through initial setup, including minimum equipment, generator operation, and connections.
Explains TIG operating modes (2-Step, 4-Step, Spot), arc ignition, and welding parameters.
Covers MMA setup, operation, pulse welding, HotStart, SoftStart, and Anti-Stick functions.
Describes how to access and adjust setup menus for TIG and Rod electrode parameters.
Addresses error codes, service messages, and solutions for operational issues.
Outlines regular maintenance tasks and proper disposal procedures for the device.
Details technical data, including voltage, current, fuse, and environmental specifications.
To Next Page
