38
Connecting the Mains Cable
General If a power source is delivered without a mains cable installed, a mains cable corresponding
to the power source's connection voltage must be connected before commissioning.
The mains cable is included in the scope of supply for the power source.
Safety
WARNING!
Work performed incorrectly can cause serious injury and damage.
► Only trained and qualified personnel may carry out the activities described in the fol-
lowing.
► Observe the information in the "Safety Rules" chapter of the Operating Instructions for
the power source and system components!
Connecting the
Mains Cable
To connect the mains cable:
- Plug in the mains cable
- Turn the mains cable 45° to the
right until it audibly locks into place
IMPORTANT! If the power source is equipped with a mains cable but no mains plug, con-
nection to the public grid must only be carried out in accordance with national guidelines
and only by trained and qualified personnel.
1
To Next Page
Loading...
Need help?
General
