46
TIG welding
Safety
WARNING!
Danger due to incorrect operation.
This can result in severe personal injury and damage to property.
► Do not use the functions described here until you have fully read and understood the
Operating Instructions.
► Do not use the functions described here until you have fully read and understood all of
the Operating Instructions of the system components, especially the safety rules.
WARNING!
An electric shock can be fatal.
If the power source is connected to the grid during installation, there is a danger of serious
personal injury and property damage.
► Only carry out work on the device when the power source's power switch is in the - O
- position.
► Only carry out work on the device when the power source has been disconnected from
the grid.
Preparation
CAUTION!
Danger of injury and damage from electric shock.
When the power switch is switched to position - I -, the tungsten electrode of the welding
torch is live.
► Ensure that the tungsten electrode is not touching any people or electrically conductive
or grounded parts (housing, etc.).
1
TT 170
TT 210
TT 170 MV
TT 210 MV
1
To Next Page
Loading...
Need help?
General
