Fronius TransTig 170 - Minimum Equipment for Welding Operations; General; TIG DC Welding; Manual Metal Arc Welding

35
EN-US
Minimum equipment for welding operations
General Depending on the welding process, a minimum level of equipment is required to work with
the power source.
The following describes the welding processes and the corresponding minimum equip-
ment for welding operations.
TIG DC Welding - Power source
- Grounding cable
- TIG welding torch with or without rocker switch
- Gas connection (shielding gas supply)
- Filler metal depending on application
Manual Metal Arc
Welding
- Power source
- Grounding cable
- Electrode holder
- Rod electrodes, depending on application