Welding current at
10 min/40 °C (104 °F) 40% D.C.
2)
500 A
10 min/40 °C (104 °F) 45% D.C.
2)
-
10 min/40 °C (104 °F) 60% D.C.
2)
440 A
10 min/40 °C (104 °F) 100% D.C.
2)
350 A
Open circuit voltage 90 V
Working voltage
TIG 10.1 - 30.0 V
Electrode 20.4 - 37.6 V
Striking voltage (U
p
) 9.5 kV
The arc striking voltage is suitable for manual operation.
Degree of protection IP 23
Type of cooling AF
Insulation class F
EMC device class
(in accordance with EN/IEC 60974-10)
A
Dimensions L/W/H (with handle) 625 / 290 / 705 mm
24.6 / 11.4 / 27.8 in.
Weight 60 kg
132.30 lb.
Mark of conformity S, CE, CSA
Idle state power consumption at 400 V 45.5 W
Power source efficiency at 440 A / 37.6 V 86%
TransTig
2200 Comfort
Mains voltage 230 V
Mains voltage tolerance -20% / +15%
Grid frequency 50/60 Hz
Mains fuse protection (slow-blow) 16 A
Mains connection
1)
No restrictions
Primary continuous power (100% D.C.
2)
)
3.0 kVA
Cos phi 0.99
Welding current range
TIG 3 - 220 A
Electrode 10 - 180 A
207
EN
To Next Page
Loading...
