Fronius TransTig 5000 Comfort User Manual

2
Actuate the torch trigger
Shielding gas flows.
3
Gradually tilt the welding torch up until
the tungsten electrode touches the
workpiece
4
Raise the welding torch and move it
into its normal position
The arc ignites.
5
Carry out welding
End of welding
1
Depending on the set mode, finish welding by releasing the torch trigger
2
Wait for the set gas post-flow and hold welding torch in position over the end of the
weld seam
58

Fronius TransTig 5000 Comfort Specifications

General

Brand	Fronius
Model	TransTig 5000 Comfort
Category	Portable Generator
Language	English