Digital gas control
for subsequent installation of the digital gas control
Gas economiser valve installation kit
for subsequent installation of a gas economiser valve
Plastic-to-metal adapter installation kit
for subsequent changeover from plastic to metal connection sockets
Gas test/wire threading installation kit
for retrofitting of a rocker switch for gas test and wire threading
Trabant
for installing the wire-feed unit on the Trabant trolley
Fixable tensioning lever installation kit
for retrofitting a fixable tensioning lever so that contact pressure cannot be ac-
cidentally adjusted
Gas nozzle touch sensor installation kit
for retrofitting with the gas nozzle touch sensor option (recognises when gas
nozzle touches workpiece, used mainly in robot welding)
Wire-end connector installation kit
for subsequent installation of the optional wire-end connector (power source
switches off at the end of the wire)
Wire-end check installation kit
retrofitting of wire end monitoring (advance warning before end of wire elec-
trode)
VR 143-2 intermediate drive adapter installation kit:
for retrofitting an adapter for the VR 143-2 intermediate drive in conjunction
with the push-pull unit
VR mount for upright console
to hold wire-feed unit when power source is fastened to an upright console
QuickConnect option
for simple installation of a wirefeeding hose between external wire electrode
and wire-feed unit 4-roller drive
Wirefeeding hose option
for protected transport of the wire electrode to the wire-feed unit 4-roller
drive
Insulated crane attachment installation kit
for fitting an insulated crane attachment
21
EN
To Next Page
Loading...
