Fronius VR 4000 - Connecting the Welding Torch; Welding Torch Connections; Safety; Connecting MIG;MAG Manual Welding Torch

Connecting the welding torch
Welding torch
connections
Fronius F++
Euro connec-
tion for Dinse for Tweco
VR 4000 X X X X
VR 4000-30 X X - -
VR 4000-30 TIME X - - -
Safety
NOTE!
When connecting the welding torch, check that
▶
all connections are connected properly
▶
all cables, leads and hosepacks are undamaged and correctly insulated.
Connecting
MIG/MAG
manual welding
torch
* The MIG/MAG manual welding torch
control plug comes in two versions:
-
as a "Tuchel" plug
-
as a LocalNet plug, e.g. on JobMas-
ter welding torches
Connecting
MIG/MAG robot
welding torch
31
EN