Fronius VR 4000 - Options; Mode Switch Option for VR 4000;VR 4000-30; Optional Control Panels for VR 4000;VR 4000-30; Optional Installation and Conversion Kits

Options
"Mode" switch
option for VR
4000/VR
4000-30
Detailed view of "Mode" switch option
The "mode" switch enables the pro-
cesses and modes to be selected on
site; the "gas test" and "wire threading"
functions can also be carried out on
site.
NOTE!
The "Mode selector switch" option cannot be used in conjunction with the VR
4000 digital display control panel.
Optional control
panels for VR
4000/VR
4000-30
The VR 4000 and VR 4000-30 wire-feed units can, as an alternative to the stand-
ard control panel, be fitted with the following control panels:
-
VR 4000 Ci control panel
-
VR 4000 digital display
Please refer to the installation instructions for a detailed description of the op-
tional control panels
VR 4000 Ci control panel option
VR 4000 digital display option
Optional install-
ation and con-
version kits
Robacta Drive installation kit
for retrofitting a connection socket for the Robacta Drive robot welding torch
Push-pull unit installation kit
for subsequent installation of a push-pull unit
20