Frontier Labs BAR-LT User Manual

6.3.3 DELETING A SCHEDULED RECORDING
To delete a scheduled recording:
1. Navigate to Main Menu  Recording Schedule.
2. Use the UP/DOWN buttons to select the schedule entry you wish to delete then press
ENTER.
3. Use the UP/DOWN buttons to select Delete then press ENTER.
6.4 MANUAL RECORDIN G
A manual recording starts recording immediately and records until you press the ENTER button.
Whilst in a manual recording, it ignores any scheduled recordings. This can be useful if you want to
make a short annotation when you are deploying your recorder or just want to start recording
without having to edit the schedule.
You can start a manual recording in 2 ways:
1. Navigate to Main Menu  Manual Recording.
2. Select the desired sample, recording channel and file format.
3. Select [ Start ] then press ENTER.
Or you can use a shortcut from the home screen:
1. Simply hold down the UP and DOWN buttons and it will start a manual recording using the
recording settings you used last.
- SCHEDULE -
Transfer Schedule >
+ New entry
REC >
REC_SUNRISE
REC_SUNSET
< Back
- EDIT ENTRY -
Start 06:00
Start 01/01/19
Duration 01h00m
Repeat: YES
every 01h00m
until 09:00
Repeat daily: YES
every 01 days
until 01/06/19
Rate 44.1kHz
Channel A+B
File WAV uncompressed
[ Save ]
[ Delete ] >
< Back
- MANUAL RECORDING -
This will start a
continuous recording
and ignore all
scheduled events.
Continue >
< Back
- RECORD SETTINGS -
Sample Rate 44.1kHz
Channel A
File WAV uncompressed
[ Start ] >
< Back

Frontier Labs BAR-LT Specifications

General

Brand	Frontier Labs
Model	BAR-LT
Category	Measuring Instruments
Language	English