EasyManuals Logo

Frontier Labs BAR-LT User Manual

Frontier Labs BAR-LT
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
7 CONFIGURING THE RECORDER
7.1 SETTING THE DEVICE NAME
If set, the device name will appear in the filenames and meta-data of the recordings and in the
logfile.
1. To set the name of the recorder, navigate to Main Menu Settings Device Name.
2. Press the UP/DOWN buttons to select the desired letter/digit then press the ENTER button
to move to the next character. (Available characters are A-Z, a-z, 0-9)
3. To finish editing the name select the blank character and press the ENTER button.
7.2 SETTING THE TIME AND DATE
The time and date are automatically set from the GPS once it is turned on however you can
manually set the time and date.
1. Navigate to Main Menu Settings Clock Settings.
2. Select the time and with the UP/DOWN buttons and press the ENTER button to move to
the next digit.
3. Increase the value of each digit using the UP/DOWN buttons then press ENTER to continue.
7.3 SETTING THE TIMEZONE
Use the following steps to set the timezone of the recorder. (Note that daylight savings is not
taken into account.)
1. Navigate to Main Menu Settings Clock Settings Timezone.
2. Use the UP/DOWN buttons to increase/decrease the timezone value then press ENTER to
save the selection.
7.4 SETTING THE GAIN
You can set the total signal gain of the recorder between 10 and 60dB. This figure takes into
account the gain of the microphone. The BAR can detect what model of Frontier Labs microphone
is attached and adjust its gain so that the total signal gain will stay the same even if you change to
a microphone with a different pre-amp, see 5.0 Microphones.
1. Navigate to Main Menu Settings Gain ChA / Gain ChB.
2. Use the UP/DOWN buttons to increase/decrease the gain value then press ENTER to save
the setting.

Other manuals for Frontier Labs BAR-LT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Frontier Labs BAR-LT and is the answer not in the manual?

Frontier Labs BAR-LT Specifications

General IconGeneral
BrandFrontier Labs
ModelBAR-LT
CategoryMeasuring Instruments
LanguageEnglish