The warranty on this snowthrower does not cover items that have
been subjected to operator abuse or negligence. To receive full
value from the warranty, operator must maintain snowthrower as
instructed in this manual. The above Service Recommendations
are supplied to assist operator to properly maintain snowthrower.
This is a check list only. Adjustment referred to will be found in the
MAINTENANCE section of this manual.
AFTER EACH USE
1. Check for any loose or damaged parts.
2. Tighten any loose fasteners.
3. Check and maintain the auger.
4. After each use, remove all snow and slush off the snowthrow-
er to prevent freezing of auger or controls.
5. Check controls to make sure they are functioning properly.
6. If any parts are worn or damaged, replace immediately.
SERVICE RECOMMENDATIONS
22
SERVICE RECOMMENDATIONS
PROCEDURE
FIRST
2
HOURS
BEFORE
EACH
USE
OFTEN
EVERY
5
HOURS
EVERY
10
HOURS
EVERY
25
HOURS
BEGINNING
EACH
SEASON
BEFORE
STORAGE
SNOWTHROWER
Tighten all screws
and nuts
✓ ✓ ✓
Check Traction
Clutch Cable
Adjustment (See
Cable Adjustment)
✓ ✓
Check Auger Clutch
Cable Adjustment
(See Cable
Adjustment)
✓ ✓ ✓
Lubricate Chains
and Hex Shaft
✓
ENGINE
Oil, Check
✓ ✓ ✓
Oil, Change
✓ ✓ ✓
To Next Page
Loading...
