10
1. Turn Tower on. See Image 3
2. Place microphone around neck and
connect clasp.
3. Adjust neck straps to position microphone
approximately 5in (14cm) from mouth.
See Image 4
4. Press One-Touch button to wake micro-
phone. Power indicator (chair icon) should
be green. See Image 5
NOTE: For daily use, you do not need to
turn the Tower on and off. The Tower will
wake up from its energy-saving standby mode
whenever you turn on a microphone or play
audio through one of the audio connections.
The Tower will go back to sleep 30 minutes
after your microphones enter sleep mode or
you stop playing audio.
Activate Tower and Microphone
Image 4
Image 5
Image 3
One-Touch
button
Power
indicator
Power
switch
5in/14cm