28
1. Place microphone around neck and
connect clasp.
2. Adjust neck straps to position microphone
approximately 5in (14cm) from mouth.
See Image 23
3. Press One-Touch button to wake microphone.
Power indicator should be green.
See Image 24
NOTE: Your microphone will go into standby
mode (off) automatically after 10 minutes in
mute mode or 10 minutes of silence. Press
One-Touch button to wake.
4. Momentarily press One-Touch button to mute
as needed for private conversations. Mute
indicator light will turn red. See Image 24
5. Press and hold One-Touch button to issue a
voice command. For detailed instructions on
using Voice Command (See page 19).
6. When the battery in your microphone gets
low, the battery indicator will flash red.
See Image 24
7. At the end of the day, charge your
microphone. (See page 30)
Image 23
Image 24
One-Touch
button
battery
indicator
power indicator
mute
indicator
5in/14cm
ITM-01 Pendant Microphone
Using