29
Installing the battery
1. Unscrew battery door on the back of the
microphone using the supplied Phillips
screwdriver. See Image 25
2. Locate the charge contacts on the battery
and on the microphone. See Image 26
3. Insert battery into compartment - battery
contacts first, then push the battery into
place. See Image 27
4. Replace battery door.
5. For best performance, charge battery
overnight before initial use.
Battery Safety
Warning: To reduce risk of fire or burns:
• Do not use batteries that have been
dropped or otherwise damaged.
• Do not attempt to open, disassemble or
service the battery pack.
• Do not crush, puncture or short external
contacts or dispose of in fire or water.
• Do not use battery if exposed to moisture.
When exposed to moisture, red checked
pattern of moisture indicator will disappear.
See Image 27.
• Do not expose to temperatures above
40°C (104°F)
• Replace only with the battery pack
designed for this product.
• Batteries shall not be exposed to excessive
heat such as sunshine, fire or the like, or
excessive cold.
Battery
Image 27
Image 25
Image 26
Moisture
indicator
Charge
contacts
To Next Page
Loading...
Need help?
General
