FrontRow JUNO User Manual

18
Touch Screen Calibration
Although unlikely, the Juno Tower's touch
screen may drift out of alignment over time.
If it does not respond accurately when you
touch it, it will need to be calibrated.
1. Turn the Tower off.
2. Press and hold the touch screen while
turning the Tower back on.
3. Continue pressing the touch screen until
the screen turns black.
4. Release the touch screen and wait for
calibration screen. See Image 19
5. Follow the on screen instructions.
NOTE: Use a stylus or similar object for best
accuracy.
Image 19
Touch the target in the
upper-left screen corner
Calibrating Touch Screen
LCD Calibration
Firmware Update
From time to time, FrontRow may make
improvements or enhancements to your
Tower's firmware. Use the FrontRow Desktop
software application (download from
gofrontrow.com/products/frontrow-juno)

FrontRow JUNO Specifications

General

Brand	FrontRow
Model	JUNO
Category	Speaker System
Language	English