EasyManua.ls Logo

Frye FONIX 8000 User Manual

Default Icon
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MAINTENANCE MANUAL
June 13, 2012
Copyright © 2012 Frye Electronics, Inc.
All Rights Reserved. Rev. June 13, 2012
FONIX® 8000

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Frye FONIX 8000 and is the answer not in the manual?

Frye FONIX 8000 Specifications

General IconGeneral
BrandFrye
ModelFONIX 8000
CategoryTest Equipment
LanguageEnglish

Summary

Chapter 1: Overview

1.1 Signal Generation Overview

Overview of the composite signal generation process, including digital basis and amplitude weighting.

1.2 Signal Detection Overview

Details the Fast Fourier Technique for signal analysis and windowing.

Chapter 2: Specifications

2.1 Acoustical Outputs

Specifies frequencies, accuracy, amplitudes, and distortion for acoustical outputs.

Chapter 3: Specification Test Procedure

3.1 Source Frequency Accuracy

Outlines the instrument, setup, and measurement for source frequency accuracy.

3.2 Digital Measurement and Readout of SPL Accuracy

Details instrument, setup, and measurement for SPL readout accuracy.

3.3 Source Attenuator Accuracy

Describes instrument, setup, and measurement for source attenuator accuracy.

3.4 Source Output Amplitude Accuracy

Specifies instrument, setup, and measurement for source output amplitude accuracy.

3.5 Telecoil Drive Current Accuracy

Outlines instrument, setup, and measurement for telecoil drive current accuracy.

3.6 Battery Simulator Voltage Accuracy

Details instrument, setup, and measurement for battery simulator voltage accuracy.

Chapter 4: Circuit Description

4.4 Circuits Detailed Description

Offers detailed descriptions of signal flows and circuits for various modules.

Chapter 5: Calibration

5.1 Microphones

Covers calibration of coupler, probe, and reference microphones.

Chapter 6: Service and Repair

Chapter 8: Safety Information