Chapter 2: 7
Frequency Range: 50-60 Hz.
Power Requirement: 0.6 A.
Fuse: T 630mAL, 0.63A / 250 V~, Type T, IEC 60127-2
Sheet III (Slo-Blo Type, Glass, 5mm x 20mm). Qty 2.
2.9 ELECTRONICS MODULE
Size: 17.3"W x 10.8"D x 6.5"H (43.9 x 27.4 x 16.5 cm).
Weight: 14.3 lbs.(6.49 kg).
2.10 PRINTER, INTERNAL
Type: High speed line thermal printer
Paper width: 4.41" (112 mm)
2.11 TEST CHAMBER
8050
Test Area: 5"W x 6"D x 1.5"H (12.7 x 15.2 x 3.8cm).
Ambient Noise Isolation: 45 dB at 1 kHz (allows THD measurement to within
3% at 60 dB source level and a 60 dB ambient).
Size: 11.5”W x 13.5"D x 9.2"H (29.2 x 34.3 x 23.4cm).
Weight: 21.8 lbs. (9.9 kg).
8120
Test Area: 4"W x 4"D x 1.75"H (10.2 x 10.2 x 4.4cm) with Re-
movable Test Surface
4"W x 4"D x 1.75"H + 5.38" cavity height (10.2 x
10.2 x 4.4 + 13.7cm) with Rotating Shaft
Ambient Noise Isolation: 45 dB at 1 kHz (allows THD measurement to within
3% at 60 dB source level and a 60 dB ambient).
Size: 13.5"W x 14.5"D x 19"H (34.3 x 36.8 x 48.3cm).
Latch protrudes another 2.25" (5.7 cm) out the front
Weight: 40.4 lbs. (18.3 kg).
To Next Page
Loading...