Frye FONIX 8000 - Chapter 2: Specifications; 2.1 Acoustical Outputs

Chapter 2: 5
Chapter 2: Specifications
2.1 ACOUSTICAL OUTPUTS
Frequencies: 200-8000 Hz in 100 Hz intervals (user interface)
200-8000 Hz in 50 Hz intervals (RS232)
Frequency Accuracy: 1%
Amplitudes: 40-100 dB in 5 dB intervals coupler, 40-90 dB in 5
dB intervals real-ear (user interface)
40-100 dB in 0.01 dB intervals coupler, 40-90 dB in
0.01 dB intervals real-ear (RS232)
Accuracy Coupler: ±1 dB from 300 to 5000 Hz, all others ±3
dB (after leveling)
Real-ear: ±3 dB, 200-8000 Hz (after leveling)
Distortion (at 70 dB SPL): Puretone: < 0.5%, 400-2500 Hz
2.2 TELECOIL OUTPUTS
Field Strength: 1, 1.78, 3.16, 5.62, 10, 17.8, 31.6, 56.2, 100 mA/M
(user interface)
0-180 mA/M in 0.01 mA/M specified intervals
(RS232)
Accuracy: Accuracy: ±2 dB
2.3 BATTERY CURRENT
Readout Range: 0.00-25.00 mA
Available Current: greater than 30 milliamps
Accuracy: ± 5% of reading ± one digit
Resolution: 8 µA
Voltages supplied: 1.5 (silver), 1.3 (zinc air)
Voltage Accuracy: ±15 millivolts. (open circuit)
Resistance accuracy: (± 6% ± 0.5 ohm)