50 Maintenance Manual
Warning: The 8000 should not be used adjacent to or stacked with other equipment. If ad-
jacent or stacked use is necessary, the 8000 should be observed for normal operation in the
configuration in which it will be used.
Guidance and manufacturer’s declaration – electromagnetic emissions
The 8000 is intended for use in the electromagnetic environment specified below. The
customer or the user of the 8000 should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The 8000 uses RF energy only for its inter-
nal function. Therefore, its RF emissions are
very low and are not likely to cause any in-
terference in nearby electronic equipment.
RF emissions
CISPR 11
Class A
The 8000 is suitable for use in all estab-
lishments other than domestic and those
directly connected to the public low-voltage
power supply network that supplies build-
ings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
To Next Page
Loading...