FS S3410 Series Hardware Installation And Maintenance Guide

Innovation · Expertise · Agility
11
1.5 Connecting a Switch
Hardware Installation and Parts Replacement
Switch Hardware Installation and Maintenance Guide
1.5.1 Connecting Power Cables
• To avoid electric shock, do not connect the power cable while the power is on.
• Before connecting cables, take ESD protection measures, for example, wear ESD gloves or an ESD wrist
strap.
• Power cables must be buried underground or routed indoors and cannot be led into the equipment room
aerially.
• Do not power on a switch before you finish installing the switch and connecting cables.
Procedure:
1. Wear an ESD wrist strap or ESD gloves. Ensure that the ESD wrist strap is grounded and in close contact
with your wrist.
2. Turn off the power module and the external power supply system for the switch.
3. Connect the power cable to the power module.
- Perform the following steps to connect the AC power cable:
1.
Insert the plug of the AC power cable into the power socket in the AC power module.
Figure 6: Connect the AC Power Cable

FS S3410 Series Specifications

General

Brand	FS
Model	S3410 Series
Category	Switch
Language	English