FUHR multitronic 881 - Wireless Control of Functions; Permanently-Open Function Tuning

38
WWW.FUHR.DE
multitronic
881/881GL/ServoAccess
1. Carefully press the programming button on the control unit for about
10 seconds. As soon as the red and green LED flash release the programming
buttion.
2. Now press the master key’s middle button within 20 sec.
» If the control unit accepts the master key, the green LED lights up for
3 seconds and then continues to flash quickly.
3. Within 20 seconds, press a key of the radio key to be paired twice in
succession. The tuning in procedure is aborted if the 20 second time limit is
exceeded.
» If the control unit accepts the master key, the green LED lights up for 3 se-
conds and then continues to flash quickly.
4. If you want to activate or deactivate the permanently-open function, press the
send button on the radio key once.
» When the permanently-open function is activated, the green LED of the
control unit flashes slowly.
10 sec.
6.1.4 WIRELESS CONTROL OF THE PERMANENTLY-OPEN FUNCTION VIA RADIO
SIGNAL | TUNING IN A RADIO KEY
PERMANENTLY-OPEN FUNCTION
2 x
within 20 sec.
within 20 sec.
1 x
within 20 sec.
Instead of the radio key VNZ80293 shown here as an example, any other FUHR radio access control system
can be taught in for activation.