46
WWW.FUHR.DE
multitronic
881/881GL/ServoAccess
8.2.2 DELETING INDIVIDUAL USER RADIO KEYS
1. Press the programming button of the control unit or the radio receiver module
until (longer than 3 sec.) the green LED (control unit) or red LED (radio
receiver module) flashes quickly.
2. Now, press the middle button of the master key within 20 seconds.
» If the control unit or the radio receiver module accepts the master key, the
green LED initially lights up for 2 seconds and then continues to flash quickly.
4. Repeat from step 1, should you wish to delete another radio key.
3. Within 20 seconds, press the corresponding key of the radio key to be deleted.
The deleteprocess is aborted if the 20 second time limit is exceeded.
» If the transmission code has been successfully deleted, the green LED lights up
for 1 second and then goes out.
within 20 sec.
> 3 sec.
within 20 sec.
To Next Page
Loading...
