______________________________________________________________________
CONTENTS
Chapter Page
1. SAFETY INFORMATION AND CONFORMITY TO STANDARDS 1
1.1 Safety information 1
1.2 Conformity to European Standards 5
2. MECHANICAL INSTALLATION 6
2.1 Operating Environment 6
2.2 Installing the inverter 6
3. WIRING 8
3.1 Removing the terminal cover and the main circuit terminal block cover 8
3.2 Wiring for main circuit terminals and grounding terminals 10
3.3 Wiring for control circuit terminals 10
3.4 Connection diagram 16
3.5 Setting up the slide switches 17
4. OPERATION USING THE KEYPAD 19
5. QUICK START COMMISSIONING 21
5.1 Inspection and preparation prior to powering up 21
5.2 Setting the function codes 21
5.3 Quick start commissioning (auto tuning) 22
6. FUNCTION CODES AND APPLICATION EXAMPLES 23
6.1 Function codes tables 23
6.2 Application Examples with FRENIC Multi 35
6.2.1 Preset speeds (multistep frequencies) selection 35
6.2.2 Dancer control using PID control block 36
8. SPECIFICATIONS AND EXTERNAL DIMENSIONS 39
8.1.1 Three-phase 200 V class series 39
8.1.2 Three-phase 400 V class series 40
8.1.3 Single phase 200 V class series 41
8.2 External dimensions 42
8.2.1 Inverter dimensions 42
8.2.2 Standard keypad dimensions 47
9.3.1 Standard DC reactors 49
9.3.2 DC reactors for EN12015 compliance 49
To Next Page
Loading...
