9.2 EMC input filter.
The following table describes the EMC input filter and the EMC compliance level for each inverter capacity.
Inverter model EMC input
filter
Compliance level
FRN0.4E1S-4 FS21559-9-07
FRN0.75E1S-4 FS21559-9-07
FRN1.5E1S-4 FS21559-9-07
FRN2.2E1S-4 FS21559-9-07
FRN4.0E1S-4 FS21559-13-07
FRN5.5E1S-4 FS21559-24-07
FRN7.5E1S-4 FS21559-24-07
C1 conducted emission (25m, 15 kHz)
C2 conducted emission(100m, 15 kHz);
C1 radiated emission (25m, 15 kHz)
FRN11E1S-4 FS21559-44-07
Three phase
400 V supply
FRN15E1S-4 FS21559-44-07
C1 conducted emission (25m, 15 kHz); C2 conducted emission (100m, 15 kHz);
C2 radiated emission (25m, 15 kHz)
FRN0.1E1S-7 FS21558-10-07
FRN0.2E1S-7 FS21558-10-07
FRN0.4E1S-7 FS21558-10-07
FRN0.75E1S-7 FS21558-10-07
FRN1.5E1S-7 FS21558-17-07
Single phase
200 V supply
FRN2.2E1S-7 FS21558-25-07
C1 conducted emission(25m, 15 kHz)
C2 conducted emission (100m, 15 kHz);
C1 radiated emission (25m, 15 kHz)
9.3 DC reactor.
9.3.1 Standard DC reactors
The following table describes the recommended standard DC reactors for each inverter model.
Inverter model Standard DC reactors
FRN0.4E1S-4 DCRE4-0,4
FRN0.75E1S-4 DCRE4-0,75
FRN1.5E1S-4 DCRE4-1,5
FRN2.2E1S-4 DCRE4-2,2
FRN4.0E1S-4 DCRE4-4,0
FRN5.5E1S-4 DCRE4-5,5
FRN7.5E1S-4 DCRE4-7,5
FRN11E1S-4 DCRE4-11
Three phase
400 V supply
FRN15E1S-4 DCRE4-15
FRN0.1E1S-7 DCRE2-0,2
FRN0.2E1S-7 DCRE2-0,4
FRN0.4E1S-7 DCRE2-0,75
FRN0.75E1S-7 DCRE2-1,5
FRN1.5E1S-7 DCRE2-3,7
Single phase
200 V supply
FRN2.2E1S-7 DCRE2-3,7
9.3.2 DC reactors for EN12015 compliance.
The following table describes the DC reactors for EN12015 compliance (with higher inductance).
Inverter model DC reactor for EN12015
compliance
FRN0.75E1S-4 DCRE4-0,75-F
FRN1.5E1S-4 DCRE4-1,5-F
FRN2.2E1S-4 DCRE4-2,2-F
FRN4.0E1S-4 DCRE4-4,0-F
FRN5.5E1S-4 DCRE4-5,5-F
FRN7.5E1S-4 DCRE4-7,5-F
FRN11E1S-4 DCRE4-11-F
Three phase
400V supply
FRN15E1S-4 DCRE4-15-F
To Next Page
Loading...
