Programming Group Send
(Max 50 Groups containing 20 addresses can be registered)
Steps: 1. Select All Services Screen
2. Select Setup Menu - Select Group Send
3. Select a Group Number (e.g. #01; #02..)
4. Press [Create/Delete]
5. Use numeric keypad to enter the 3-digit Address
number (e.g 001) and Press [Add]
6. Repeat Steps to continue registering fax number into the
group
7. Press Save to Exit Setup Group Send Menu
Transmission Report
(To activate transmission report option in order to print a delivered/undelivered report
after transmission)
Steps: 1. Load document(s) onto the Document Feeder
2. Enter fax number
3. Go to Send Option Tab - Select Transmission Report
4. Select On and press Save
5. Press Start
* A transmission report is automatically printed when the transmission completes.
To Next Page
Loading...
Need help?
General
